used amat centura

Identify the Exact Centura Configuration

Centura names cover multiple equipment generations and process families. A platform name alone does not define the installed process, chamber hardware, wafer size, or revision. This offer is identified as a Centura II DPS tool for 8-inch wafers, serial number 9532, Tool ID DRP1P3, in used and deinstalled condition.

Before purchase, match the machine record in this order:

1. Mainframe and identity: Centura generation, serial number, Tool ID, nameplate photos, and deinstallation record.
2. Process family: Confirm DPS metal, polysilicon, deep-trench, or another installed etch configuration. DPS and DPS Plus are not interchangeable names.
3. Wafer handling: Verify the 200 mm wafer format, load locks, robot, orienter, slots, carriers, and transfer interfaces.
4. Chamber map: Record every process and auxiliary chamber by position, model, serial number, hardware revision, and present condition.
5. Supporting subsystems: List generators, matching networks, pumps, valves, gas delivery, temperature control, endpoint hardware, system controller, software version, and safety interlocks.

Use the present installed hardware and modification history as the source of truth for a previously operated tool.

What to Request Before Comparing Quotes

A comparable used-tool quotation needs a defined equipment boundary. Ask the seller to identify the exact included modules and the evidence available for each condition statement.

Available Used AMAT Centura Tool

The following product is the specified tool record supplied with this page.

E10-0015_DRP1P3 AMAT Centura II DPS

A used and deinstalled Applied Materials Centura II DPS for 8-inch wafers. The published product record identifies serial number 9532 and Tool ID DRP1P3. Request the chamber map, included subsystem list, inspection evidence, price, and delivery scope for the current offer.

• Product recordE10-0015_DRP1P3
• ToolApplied Materials Centura II DPS
• Wafer size8 inch / 200 mm
• Serial number9532
• Tool IDDRP1P3
• ConditionUsed - As Is / Deinstalled

Request a Quote for This Centura II DPSView E10-0015_DRP1P3 Tool Details

Match Process Family, Chambers, and Wafer Format

Centura is a single-wafer, multi-chamber platform family used with different process products. The name that follows Centura changes the equipment context and the parts required for operation.

The offered record states Centura II DPS and 8-inch wafers. Confirm the installed DPS application and every chamber position before evaluating process suitability, spare compatibility, or refurbishment cost.

Inspect the Tool Against an Agreed Acceptance Plan

Used and deinstalled status describes the commercial condition, not the present operating result. Build the acceptance plan around the intended reuse, refurbishment depth, and available facilities.

1. Document and identity review: Match the mainframe, chambers, modules, serial numbers, revision labels, software, and included accessories to the quotation.
2. External condition: Record impact damage, corrosion, missing covers, cut cables, disconnected tubing, contamination, storage exposure, and transport damage.
3. Interfaces and motion: Inspect sealing faces, doors, slit valves, robot and wafer handling, connectors, cooling lines, gas paths, vacuum fittings, sensors, and interlocks.
4. Subsystem checks: Where facilities and safe procedures permit, agree on electrical, motion, communication, pressure, leak, vacuum, pump, RF, temperature, and control checks that apply to the included hardware.
5. Traceable exceptions: List every unavailable test, known fault, missing part, replacement recommendation, and open refurbishment item in the acceptance record.

Define who supplies utilities, fixtures, consumables, test wafers, pumps, abatement, installation labor, and process qualification. A visual inspection cannot establish vacuum integrity, electrical safety, process performance, or production readiness.

Prepare the Site and Integration Inputs

Confirm the facility requirements from the exact configuration record and applicable installation documentation. Chamber count, pumps, abatement, RF hardware, controller generation, and local code requirements can change the site plan.

• Tool footprint, service clearances, floor loading, vibration criteria, access route, rigging points, and installation sequence
• Electrical supply, grounding, distribution, rack loads, emergency-off integration, and safety interlocks
• Process gases, purge gases, compressed air, cooling water, exhaust, vacuum pumps, forelines, abatement, and leak-detection requirements
• Facility interfaces, connector standards, flow and pressure requirements, drain or waste handling, and environmental controls
• Host communication, factory network, software license status, data interfaces, recipes, backups, and cybersecurity controls
• Cleanroom classification, contamination controls, decontamination evidence, packaging, unpacking, and move-in procedures

Use verified installation drawings and utility matrices for this serial-number configuration before construction or shipment.

Set the Price, Delivery, and Service Boundary

The final price and lead time depend on the included hardware, current condition, inspection access, refurbishment scope, packing, logistics, destination, and required commissioning support. Ask for a written scope that separates the equipment sale from optional services.

For the first inquiry, provide the intended process, fab location, required delivery date, expected acceptance level, and whether you need as-is shipment or a defined refurbishment and commissioning package.

Used AMAT Centura FAQ