used amat centura dps

Used Semiconductor Equipment

Review an Applied Materials Centura II DPS for 8-inch wafers, listed as Used – As Is / Deinstalled. Use S/N 9532 and Tool ID DRP1P3 to keep documents and quotations tied to this asset.

Request a Quote View Listed Tool

Front equipment view from the listed tool’s photo set.

What “Centura DPS” Tells You—and What It Does Not

DPS stands for Decoupled Plasma Source and identifies an etch chamber technology; it does not, by itself, define the complete Centura system. Centura platforms have supported different process products, wafer sizes, and chamber versions.

The public record identifies this tool as Centura II DPS and 8-inch, but it does not state the installed etch application. Match the chamber names, process kits, hardware revisions, and documented upgrades to your process before selecting the system.

Used AMAT Centura DPS Buying Checklist

Ask for a configuration and condition package that lets engineering, facilities, and purchasing review the same equipment scope.

Decision item	Information to request	Why it affects the purchase
Tool identity	Nameplate photos, S/N 9532, Tool ID DRP1P3, mainframe generation, and build records	Confirms that every document and quoted item belongs to the listed tool.
Installed process configuration	Chamber names, process kits, chamber count, wafer size, and installed options	Determines whether the system matches the intended etch application and 8-inch process flow.
Current condition	Deinstallation date and method, last-run status, fault history, available test results, and storage conditions	Separates documented condition from assumptions based on appearance or model name.
Equipment completeness	Mainframe, chambers, load locks, robot, pumps, gas and RF subsystems, accessories, cables, and loose parts included in the sale	Defines what must be sourced separately before installation.
Controls and software	Controller configuration, software version, licenses, recipes, backups, authorized access-transfer requirements, and hardware changes	Shows what is available for startup and where compatibility work may be required.
Facilities and interfaces	Footprint, weight, electrical service, cooling water, gases, exhaust, vacuum, compressed air, and host communications	Lets the receiving facility plan space, rigging, hookups, and safety review.
Documents and acceptance	Manuals, drawings, maintenance records, decontamination records, packing list, inspection scope, and agreed acceptance criteria	Creates a checkable basis for quotation, receiving inspection, and project handoff.
Commercial scope	Price basis, payment terms, packing, freight, insurance, taxes or duties, lead time, installation, training, warranty, and return terms	Makes supplier quotes comparable and prevents scope gaps from appearing after the order. Provide the destination port when requesting CIF pricing.

Listed Used AMAT Centura DPS Tool

Close-up of equipment components and connected lines from the listing photo set.

Detail view from the E10-0015_DRP1P3 listing photo set.

E10-0015_DRP1P3-AMAT_Centura II DPS

Use this listing to review the tool’s photo set and open its individual equipment record.

PNAMAT Centura DPS
ConditionUsed – As Is / Deinstalled
ToolApplied Materials Centura II DPS
Wafer size8-inch
Serial number9532
Tool IDDRP1P3

Request a Quote View Tool Details

Plan an As-Is Tool From Handoff to Qualification

Freeze the handoff baseline. Attach the agreed photo set, equipment labels, component inventory, condition records, and acceptance terms to the order record.
Control the move. Assign responsibility for deinstallation records, disconnection points, protective measures, rigging, packing, shock and moisture controls, freight, and insurance.
Record receipt. Photograph the packaging before opening, compare the shipment with the packing list, and document shock, moisture, or visible damage before moving components into the fab.
Recommission the equipment. Complete mechanical placement, utility connections, leak checks, subsystem startup, software recovery, calibration, and required repairs under an agreed responsibility matrix.
Qualify the process. After equipment startup, run the receiving site’s wafers, recipes, metrology, and target results under a separate process acceptance plan.

Chinsortech Support for Legacy AMAT Projects

Chinsortech develops and manufactures semiconductor equipment parts. Its documented product and service scope also includes assemblies, equipment refurbishment, and related after-sales service. Its parts records include selected Centura 5200 configurations as well as other AMAT platforms.

For parts or refurbishment requests connected with this tool, provide the platform, chamber, part number and revision, quantity, required condition, and destination when those details are available. A Centura family name alone does not establish component compatibility.

Discuss Your Centura Project