applied materials part numbers

How to Use This Part Number Catalog

The part number is the primary lookup key for every item on this page. Keep all digits, revision letters, and suffixes from the installed-part label because a shortened number can refer to a different hardware version.

After locating a matching number, compare the description with the tool and chamber context. Platform names such as Endura, Centura, P5000, or Emax can cover different processes and hardware configurations, so the platform name alone does not establish a fit.

Confirm the Exact Tool and Chamber Configuration

Use this sequence before requesting a final match:

1. Record the complete part number exactly as shown on the label, including any revision or suffix.
2. Identify the equipment platform and the specific process chamber or subsystem.
3. Confirm the wafer size and any configuration terms shown on the old part, drawing, or bill of materials.
4. Compare the part description and installed position with the catalog entry.
5. Send clear label and old-part photos when the number or configuration is incomplete.

A shared part name does not make two parts interchangeable. A pedestal, blocker plate, blade, cover, or lid can have different dimensions, interfaces, materials, and process exposure for different chamber configurations.

Featured Part Numbers

Product image of the circular 300 mm EMAX plate clamp lid associated with PN 0040-43884.

0040-43884 — PLATE CLAMP LID 300MM, EMAX

Supply condition: 2nd Source New

• Identification300 mm; EMAX; plate clamp lid
• Catalog contextETCH category; the listed product page does not specify a tool

Inquire About 0040-43884View Product Details

Product image of the blocker plate associated with the listed PN 0021-01569 product page.

0021-01569 — BLOCKER PLATE

This blocker plate is listed on the product page under PN 0021-01569. If the installed-part label contains a suffix, include it in the RFQ so Chinsortech can review the exact record.

• Supply condition2nd Source New
• IdentificationBlocker plate
• Catalog contextThe listed product page does not specify a tool

Inquire About 0021-01569View Product Details

Product image of the 6-inch HP upgrade blade associated with PN 0021-76356.

0021-76356 — BLADE, HP UPGRADE, 6 IN

This 6-inch HP upgrade blade is listed under PN 0021-76356. The exact Centura chamber configuration must be verified for this entry.

• Supply condition2nd Source New
• Identification6-inch HP upgrade blade
• Configuration checkConfirm the exact Centura chamber configuration from the equipment and old-part records

Inquire About 0021-76356View Product Details

Product image of the lower 8-inch B101 pedestal cover associated with PN 0021-20718.

0021-20718 — Pedestal Cover Lower 8" B101

Supply condition: 2nd Source New

• IdentificationLower pedestal cover; 8-inch; B101
• Listed tool contextEndura 5500 PVD

Inquire About 0021-20718View Product Details

Product image of the 6-inch pedestal associated with PN 0200-27122.

0200-27122 — 6" PEDESTAL

Supply condition: 2nd Source New

• Identification6-inch pedestal
• Listed tool contextEndura 5500 PVD

Inquire About 0200-27122View Product Details

What to Send for a Faster Part Review

Include the following information in the RFQ:

• Complete part number, revision, suffix, and description
• Equipment platform, process chamber, and subsystem
• Wafer size and installed position
• Required quantity and requested supply condition
• Clear photos of the part and label; drawings or a sample when identification remains incomplete
• Material, surface-treatment, cleanliness, packaging, certificate, or inspection-report requirements
• Delivery destination and required date; include the destination port when requesting a CIF quote

Chinsortech confirms price, availability, and lead time after reviewing the material, quantity, transportation, configuration, and other product requirements in the RFQ.

Inspection and Nonconforming Product Flow

Incoming raw materials pass through a quality-check point before production. Completed products are inspected before accepted items enter the warehouse.

An item that does not meet the inspection decision moves to rework, return, or scrap handling. A reworked item must pass through quality inspection again before it can be accepted into inventory.

Define any required measurement method, tolerance, sampling plan, report, certificate, and acceptance criterion in the RFQ. These requirements are part-specific and need to be agreed for the quoted item.

Part-Number Sourcing FAQ