Applied Materials Equipment Spare Parts

Applied Materials equipment spare parts for Endura 5500 PVD tools, with ceramic and insulating components selected by part number, chamber configuration, wafer-size context, and drawing review. Chinsortech helps buyers move from a replacement-part request to a quote-ready specification without treating a platform name alone as proof of fit.

H1 matches the commercial search term; fit is confirmed by part number and chamber configuration.

Review fit with an engineer Online chat
Ceramic DC-bias and insulating spare parts for Applied Materials equipment
PVD lifter washer insulator for Applied Materials Endura equipment

Ceramic And Insulating Parts For PVD Chamber Interfaces

Product List

This subcategory brings together ceramic stand-offs, insulators, lifter spacers, a TXZ heater lift pin, and a source insulator for Applied Materials Endura 5500 PVD equipment. These parts sit around wafer lift, heater, source, and DC-bias interfaces, so the replacement decision depends on geometry and assembly context as much as on the product name.

Use the cards below as a controlled starting set. The formal part number, tool context, and product detail page should stay together when a buyer requests a quotation.

  • Review part number and revision before asking for a replacement.
  • Confirm the PVD chamber, lifter or heater assembly, and wafer-size context.
  • Use the drawing or mating dimensions when the installed configuration is uncertain.

Match The Part To Tool Configuration

Product List

Applied Materials platform names can cover multiple chamber and process configurations. A reliable request should therefore identify the tool family, chamber or module, process kit, wafer-size context, part number, and revision when available. For this page, the listed products are associated with Endura 5500 PVD, but the final fit still needs confirmation against the installed assembly.

For ceramic and insulating parts, also describe the mating component and the service condition that matters to the replacement. A clear photo, marked-up drawing, or the old part number can shorten the review and reduce the risk of a visually similar but incompatible substitution.

  • Start with the exact part number shown on the installed or removed part.
  • Add chamber, process-kit, wafer-size, and revision details when available.
  • Flag dimensional or material requirements that must be checked on a drawing.

Prepare A Quote-Ready Spare-Part Request

Product List

A quote-ready request should include the equipment and chamber context, the target part number, required quantity, delivery destination, and any inspection or documentation requirement. If the part is a ceramic, insulator, heater-related component, or source interface, attach the drawing or a clear reference photo whenever the mating geometry is not certain.

Use the product links to review the six listed parts, then send the requirement through the quote form. Chinsortech can review the information and confirm whether the requested replacement should proceed by part-number match, drawing review, or additional configuration checks.

  • State quantity, target delivery window, and destination country or region.
  • Include the old part number, revision, and equipment configuration.
  • Request applicable inspection or traceability documents before order confirmation.

Applied Materials Equipment Spare Parts For Endura 5500 PVD.

Chinsortech supplies selected ceramic, insulating, heater and lift-related parts used in Applied Materials Endura 5500 PVD support, including components for wafer lifting, chamber insulation, heater isolation and DC-bias interfaces. These six Applied Materials Equipment Spare Parts cover the listed ceramic and insulating interfaces around Endura 5500 PVD wafer-lift, heater, source, and DC-bias assemblies. The cards retain formal supplier part names so quote requests match installed records. In this page, PVD means physical vapor deposition, DC-bias means direct-current bias, TXZ is the source heater/lift assembly designation, and CER denotes ceramic. Final fit still depends on the part number, chamber configuration and drawing.

Contact an engineer Online chat
0020-20126 ceramic DC-bias stand-off for Endura 5500 PVDCeramic stand-off for a DC-bias assembly; confirm mating geometry before replacement.

Ceramic DC-Bias Stand-Off (0020-20126)

Endura 5500 PVD; DC-bias ceramic stand-off assembly

  • Application / fitEndura 5500 PVD; DC-bias ceramic stand-off assembly
  • Pressure / load rangeConfiguration-based; verify Endura 5500 PVD chamber and DC-bias assembly
  • MaterialCeramic; confirm grade against drawing or specification
  • Interface standardDC-bias mounting interface; verify part number and mating geometry
Request a QuoteOnline chatProduct details
0020-23093 washer insulator for an Endura 5500 PVD lifterInsulating washer for a PVD lifter assembly; verify the mating surfaces and revision.

PVD Lifter Washer Insulator (0020-23093)

Endura 5500 PVD; PVD lifter and insulating washer interface

  • Application / fitEndura 5500 PVD; PVD lifter and insulating washer interface
  • Pressure / load rangeConfiguration-based; verify PVD lifter assembly and wafer-size context
  • MaterialInsulating washer material; confirm grade against drawing
  • Interface standardPVD lifter / washer interface; verify lift assembly and mating surfaces
Request a QuoteOnline chatProduct details
0200-01798 single-taper ceramic TXZ heater lift pin for Endura 5500 PVDSingle-taper ceramic lift pin for a TXZ heater assembly; confirm the lift geometry.

TXZ Heater Lift Pin, Single-Taper Ceramic (0200-01798)

Endura 5500 PVD; TXZ heater and wafer-lift assembly

  • Application / fitEndura 5500 PVD; TXZ heater and wafer-lift assembly
  • Pressure / load rangeConfiguration-based; verify TXZ heater and wafer-lift assembly
  • MaterialCeramic; confirm grade against drawing or specification
  • Interface standardTXZ heater lift interface; single-taper fit and wafer-lift geometry
Request a QuoteOnline chatProduct details
0020-20521 lifter insulator spacer for Endura 5500 PVDInsulating lifter spacer for stack-height and mating-surface review.

Lifter Insulator Spacer (0020-20521)

Endura 5500 PVD; lifter insulator spacer interface

  • Application / fitEndura 5500 PVD; lifter insulator spacer interface
  • Pressure / load rangeConfiguration-based; verify lifter spacer geometry and chamber revision
  • MaterialInsulating ceramic or specified material; confirm grade against drawing
  • Interface standardLifter spacer interface; verify stack height and mating surfaces
Request a QuoteOnline chatProduct details
0020-20123 ceramic heater isolator for Endura 5500 PVDCeramic heater isolator for a PVD heater assembly; confirm dimensions and revision.

Ceramic Heater Isolator (0020-20123)

Endura 5500 PVD; ceramic heater-isolator interface

  • Application / fitEndura 5500 PVD; ceramic heater-isolator interface
  • Pressure / load rangeConfiguration-based; verify ceramic heater-isolator dimensions and chamber revision
  • MaterialCeramic; confirm grade against drawing or specification
  • Interface standardCeramic heater-isolator interface; verify heater assembly and mounting pattern
Request a QuoteOnline chatProduct details

Confirm The Commercial Route With The Part Number.

Availability, quantity basis, timing and documents are confirmed against the requested part and configuration.

Sample / trial

Sample / trial: quote by exact part number and configuration; sample availability, charge and timing are confirmed per request.

Pilot / small batch

Pilot / small batch: provide quantity, drawing or reference photo, and destination so unit basis and production timing can be quoted.

Repeat / bulk supply

Repeat / bulk supply: confirm the approved part number, revision, inspection requirement and replenishment plan before order release.

Supply status

Supply status: stock or made-to-order position and the delivery window are confirmed by part number; do not infer availability from the platform name alone.

Global support

Global support: international quotation support is available through the Chinsortech sales contact; destination and shipping terms are confirmed in the quote.

Documents supplied

Documents supplied: request applicable inspection, packing and traceability documents with the quotation; availability is confirmed for the selected part and order.

Send A Drawing For Endura 5500 PVD Fit Review.

Attach a drawing or reference file when the installed chamber, mating geometry or revision needs review before quotation.

Files are reviewed for quotation purposes. Upload only information you are authorized to share; the companion handler enforces the configured file limit.

Applied Materials Equipment Spare Parts: Buyer Questions.

Answers below focus on fit confirmation, the listed parts, drawing review, and quotation inputs.

How do I confirm the right Applied Materials spare part?

Start with the exact part number, then add the Endura 5500 PVD tool, chamber or module, process-kit context, wafer-size context, and revision when available. A drawing or photo of the mating assembly helps confirm the final fit.

Which Endura 5500 PVD parts are listed on this page?

The list includes a ceramic DC-bias stand-off, PVD lifter washer insulator, TXZ heater lift pin, lifter insulator spacer, 13 in source insulator, and ceramic heater isolator. Each card links to its Chinsortech product detail page.

What material and dimensional information should I send?

Send the stated ceramic or insulating material requirement, the part number, key dimensions, mating surfaces, and wafer-size context. For the 13 in source insulator, confirm the drawing and mounting pattern rather than relying on the nominal size alone.

Can you review a drawing or reference photo?

Yes. Use the drawing channel to attach a PDF, DWG, DXF, STEP, JPG, JPEG, or PNG file under the form limit, together with required quantity and a work email. The review confirms what information is still needed for a quote.

How are quantity, lead time, and documents confirmed?

Pricing, MOQ, sample or production timing, and available inspection or traceability documents are confirmed against the requested part number and configuration before order confirmation. Include destination and quantity so sales can return a usable quotation.

Tell Us The Equipment, Condition And Quantity.

Send the part number and configuration details first so the replacement fit can be reviewed before quotation.

By submitting, you agree that the provided inquiry details may be used to review the requested spare part and respond to your quotation request.