amat semiconductor equipment spare parts

2nd-Source New Replacement Parts

Chinsor supplies new replacement parts for selected semiconductor CVD tool configurations. Start with the full part number to begin technical matching.

Chinsor manufactures and supplies the replacement parts shown here; Applied Materials and AMAT identify the third-party equipment context.

View Available PartsRequest a Part Match
Chinsor semiconductor equipment spare part for CVD tool applications

Match the Exact Part Before You Order

An AMAT platform name narrows the search, but it does not identify a unique spare part. Centura, P5000, Endura, and other platform families can contain different processes, chambers, wafer sizes, and hardware generations. Use the installed configuration as the source of truth.

Follow this identification sequence:

  1. Platform and host system: Record the platform family, equipment model, and equipment serial number when available.
  2. Process and chamber: Identify whether the installed chamber is CVD, PVD, etch, or another process configuration, then record the complete chamber or product-family name.
  3. Wafer size and kit: Confirm the wafer size and any process-kit or chamber-version identifier.
  4. Part identity: Copy the complete part number from the label or bill of materials, including every suffix, version letter, and REV designation.
  5. Installed hardware evidence: Add photos of the label, the complete removed part, mating faces, ports, connectors, and the assembly location.
  6. Change history: For upgraded or refurbished tools, include retrofit records, known replacement numbers, and the current control or software version when it affects the component.

If the label is missing or unreadable, combine photos, assembly position, interface dimensions, the parent assembly number, and the correct manual or drawing revision. A similar name or appearance cannot establish interchangeability.

Send Part Number and Photos

Validate a 2nd-Source Part Beyond Mechanical Fit

A replacement part must satisfy the requirements that affect the chamber, process, and maintenance plan. Mechanical installation is only one acceptance point.

Verification areaWhat to compare with the installed requirement
IdentityFull part number, description, revision, quantity, and target assembly
Geometry and interfacesCritical dimensions, locating faces, fasteners, sealing surfaces, threads, gas passages, cooling passages, electrical connections, and sensor connections that apply to the part
Material and surfaceBase material, coating or anodized finish, surface condition, and chemical and temperature compatibility
Vacuum and process dutySealing or leak criteria, pressure or vacuum exposure, process gases, cleaning chemistry, and thermal conditions
CleanlinessParticle and contamination requirements, cleaning method, packaging, and any required test limits
Functional acceptanceMotion, position, signal, electrical, thermal, flow, or pressure tests that apply to the component
TraceabilityPart number, revision, batch, quantity, order reference, and inspection records linked to the supplied parts

Agree on the drawing revision, inspection items, acceptance limits, and required records before production or shipment. If material, coating, geometry, gas flow, thermal behavior, or electrical characteristics differ from the installed part, evaluate the process impact before release.

Discuss Acceptance Requirements

Featured 2nd-Source New Parts

These five new second-source parts have dedicated product records, detail pages, and inquiry paths.

Chinsor 0010-37264 Cooldown Chamber Multi Slot Ass’y new second-source assembly

0010-37264 Cooldown Chamber Multi Slot Ass’y 2nd Source New

A new second-source multi-slot cooldown chamber assembly listed for a Centura 5200 DCVD configuration. Confirm the complete assembly identity and interfaces against the installed system before ordering.

  • Part number0010-37264
  • ProductCooldown Chamber Multi Slot Ass’y
  • Condition2nd Source New
  • Process categoryCVD
  • Listed toolCentura 5200 DCVD
Request a Quote for 0010-37264 Cooldown Chamber Multi Slot Ass’yView 0010-37264 Cooldown Chamber Multi Slot Ass’y Details
Chinsor 0040-39883 5000/5200 WXZ CHAMBER new second-source CVD chamber

0040-39883 5000/5200 WXZ CHAMBER 2nd Source New

A new second-source 5000/5200 WXZ chamber in the CVD product category. Chinsor’s product page lists Centura 5200 DCVD, while its product list maps this part to Centura 5200 WCVD. Submit the installed chamber designation, part label, and hardware revision so the target configuration can be confirmed.

  • Part number0040-39883
  • Product5000/5200 WXZ CHAMBER
  • Condition2nd Source New
  • Process categoryCVD
  • Tool referenceCentura 5200 family; DCVD/WCVD record requires configuration confirmation
Request a Quote for 0040-39883 5000/5200 WXZ CHAMBERView 0040-39883 5000/5200 WXZ CHAMBER Details

Inspection and Release Controls

Chinsor’s documented production flow places a quality check before raw material enters production and another quality check after production. Accepted parts move into inventory; nonconforming parts follow the inspection decision into rework, return, or scrap. Reworked parts pass through quality inspection again before they can be accepted.

Returned products enter an inspection and classification process. Repairable items move to repair and then return to a pass/fail decision. Items that remain outside the agreed requirement follow the return or scrap path.

Production and return decisions are made against the agreed part-specific inspection plan.

Define an Inspection Plan

Build a Quote That Can Be Compared

Include the following information in the first request:

  • Full part number, including suffixes and REV designation
  • Formal part description and required quantity
  • Platform, host system, process chamber, and wafer size
  • Photos of the label, full part, interfaces, and installed position when available
  • Required material, surface treatment, cleanliness, inspection, and documentation conditions
  • Delivery destination, requested date, packaging requirements, and preferred trade term
  • Destination port when requesting a CIF quotation

Part identity, revision, material, surface treatment, test scope, quantity, inventory status, packaging, logistics, and required delivery date can change price and lead time. Ask each supplier to state what the quotation includes: the exact part and condition, inspection or documentation scope, packaging, trade term, freight responsibility, lead time basis, and any technical exclusions tied to the installed configuration.

Request a Comparable Quote

Chinsor as Your Parts Supplier

Wuxi Chinsor Technology Co., Ltd. was established in 2017 in Wuxi, Jiangsu, China. The company develops and manufactures semiconductor equipment parts and provides related equipment service. Its documented business scope includes parts for PVD, CVD, and etch equipment, as well as components and equipment refurbishment services.

Contact Chinsor

  • Email: [email protected]
  • Phone / WhatsApp: +86 180 1535 4460
  • Address: No.29-1, Huibei Road, Liangxi District, Wuxi City, China.
Contact the Chinsor Team

Frequently Asked Questions

Are these original Applied Materials parts?

The five products on this page are identified as new second-source parts supplied by Chinsor. Applied Materials and AMAT are third-party equipment identifiers used to define the matching context.

How should I handle the DCVD/WCVD difference for part 0040-39883?

Submit the installed chamber designation, part label, equipment configuration, and revision for review. The product page and product-list records use different tool mappings, so the target configuration must be resolved before ordering.

Request a Match and Quote for AMAT Semiconductor Equipment Spare Parts

Use the form to send the full part number, revision, platform, process chamber, wafer size, quantity, destination, and requested delivery date. In the message, note any required material, surface treatment, cleanliness, test, documentation, packaging, or trade-term conditions. If you have label, interface, or installed-part photos, mention them so the team can arrange the appropriate file exchange.

  • Phone: 18015354460
  • Email: [email protected]
  • WhatsApp: 18015354460
  • Address: No.29-1, Huibei Road, Liangxi District, Wuxi City, China.

Direct contact: [email protected] | +86 180 1535 4460